How to Maintain the Gloss of your Car?

car gloss
Originally uploaded by rajiprem72

Do you want to maintain the gloss of your car for years together?

Do you want your car look as a new car always?

What will you do if a paint of a different color falls on your car?

Would you be a happy if there is a product that comes with a guarantee for all the above.

If your answer is yes to all the questions above then read further about a patented product.

QMI PAINT SEALANT APPLICATION

Everyone would love to keep the new car (showroom) shine on their vehicle. QMI Paint Sealant is one of the only products that will help you to achieve this goal and keep that shine for a longer period of time. This application must be done under a roof covered area and should not be done in direct sunlight. Since, the application is very important part of this and following steps should be followed to achieve best result.

1. Wash the vehicle with good shampoo (car wash shampoo or even ordinary shampoo is fine) to remove all dirt and deposits.

2. Apply QMI Paint De-Oxidizer on a wet towel cloth (or cotton cloth) and rub on to the vehicle in circular motion pressing hard, so that it removes the dead pigments of paint and will bring out the original paint. Need not worry, as QMI Paint De-Oxidizer does not have any harsh chemicals – only mild detergents to remove the oxidized build-up on the paint.

3. Remove QMI Paint De-Oxidizer completely from the vehicle by using another clean cotton (dry) cloth.

4. Now, apply QMI Paint Sealant on a small (palm size) clean cotton cloth and apply in a circular motion on the vehicle so as to cover the whole vehicle. Let it dry (which takes 5 – 10 minutes) and now you will notice, white deposit (PTFE particles) on the vehicle.

5. Touch to feel that QMI Paint Sealant is completely dry. Now, use a good buffing machine at medium speed to make PTFE particles stick permanently on the vehicle. Instead, you may even use a clean cotton (dry) cloth (in case you do not have a buffing machine). However, make sure to rub the cotton cloth in a circular motion, pressing hard against the vehicle, to make sure it generates enough heat to activate SX-6000 – which will make PTFE particles to stick permanently on the vehicle paint and can be removed only by dirt particles, thereby, giving protection to your vehicle paint for a minimum of one year and if taken care of properly, may even last up to three years.

6. DO NOT USE HARSH DETERGENTS TO WASH YOUR VEHICLE.

7. USE WATER ONLY FOR WASHING VEHICLE, AFTER PAINT SEALANT APPLICATION. KEEP A BUCKET OF WATER AND DIP CLEAN COTTON CLOTH IN IT. WASH ONE PORTION OF VEHICLE, THEN DIP IT IN THE BUCKET (to remove sand particles) BEFORE USING THE CLOTH TO CLEAN ANOTHER PORTION OF THE VEHICLE.

8. DUST OFF THE VEHICLE (to remove sand particles) WITH A CLEAN COTTON CLOTH, BEFORE WIPING VEHICLE WITH CLOTH.

9. DRY YOUR VEHICLE, USING ANOTHER COTTON CLOTH OR A GOOD CHAMOISH.

10. DO NOT USE ANY WAX OR POLISH AFTER QMI PAINT SEALANT, AS WAX ATTRACTS DUST AND WILL REDUCE THE LIFE OF PTFE.

11. DO NOT USE PETROL OR DIESEL TO REMOVE ANY SPOTS ON YOUR VEHICLE AS THEY WILL PERMANENTLY REMOVE THE GLOSS AND SHINE – WHICH CAN NEVER BE RECOVERED.

12. CALL QMI PROFESSIONALS IN CASE OF ANY PAINT (FOREIGN SUBSTANCE) FALLING ON YOUR QMI PROTECTED VEHICLE.

For any commercial enquiries please feel to contact at +91 99629 72844 or mail at services@technosolutions.in